Electric Door Lock Switch - Separation

Number 86-8-19 Date 10/86

Subject: ELECTRIC DOOR LOCK SWITCH SEPARATION

1985-86 BONNEVILLE, PARISIENNE AND GRAND PRIX MODELS

SWITCH ASSEMBLY:

Some electric door lock switches may become separated while installed in the vehicle. This condition may be reported on either the right or left or both doors. Two different type clips have been released to correct this condition. Clips should be added to both door lock switches even if only one is reported as separated.

For Switch P/N 20209091 - - - Use Clip, P/N 16602550
For Switch P/N 3078509 - - - Use Clip, P/N 16602549

To Install Clilps:

1. Remove switch assembly as described in the body Service Manual.

2. If switch has become separated, inspect for damage, if no damage is found reassemble switch and add two clips as indicated on Illustration.

3. If switch is separated and damaged, replace complete switch assembly and add clips as indicated on Illustration.

Use applicable Labor Operation Number and Time.