Engine: Service and Repair

"B" Body:

"G" Body:

Removal

1. Disconnect battery.
2. Remove air cleaner.
3. Drain radiator.
4. Disconnect radiator hoses.
5. Remove upper fan shroud.
6. Remove fan assembly.
7. Disconnect heater hoses at engine.
8. Remove power steering pump and lay aside.
9. Remove A/C compressor and lay aside.
10. Disconnect accelerator and T.V. cables.
11. Disconnect cooler lines at radiator.
12. Remove radiator.
13. Disconnect vacuum hoses.
14. Disconnect C.C.C. wiring harness.
15. Disconnect A.I.R. hose at pipe fot converter.
16. Remove washer bottle.
17. Disconnect engine wiring harness at bulkhead.
18. Disconnect necessary wires.
19. Remove hood.
20. Remove distributor cap.
21. Disconnect cruise control cable.
22. Disconnect battery positive cable to battery and frame.
23. Disconnect battery negative cable at A/C hose bracket alternator bracket.
24. Raise vehicle.
25. Remove crossover pipe and catalytic converter as an assembly.
26. Remove flywheel cover.
27. Remove torque converter bolts.
28. Remove motor mount bolts.
29. Disconnect fuel hose at fuel pump.
30. Disconnect torque converter clutch wiring at transmission.
31. Disconnect transmission cooler lines at clip on engine pan.
32. Remove transmission to engine bolts.
33. Lower vehicle.
34. Support transmission.
35. Install lifting device.
36. Remove engine.


Installation

^ For installation, reverse removal procedures.