Differential Assembly: Specifications
| Carrier Type | Integral | |
| Ring Gear & Pinion Backlash | Method | Shims |
| Adjustment Note: Side gear backlash. | .006-.008 Inch (in) | |
| Pinion Bearing Preload | Method | See Note Note: Tighten pinion shaft nut with inch-pound torque wrench. |
| New Bearing | 20-25 Inch Pound-Force (in.lb) | |
| Used Bearing | 10-15 Inch Pound-Force (in.lb) | |
| Differential Bearing Preload | Method | Shims |
| New Bearing | 35-40 Inch Pound-Force (in.lb) | |
| Used Bearing | 20-25 Inch Pound-Force (in.lb) |