A/T - New Design LO and Reverse Pipe Seal
Number 87-7-22 Date 5/87Subject: NEW DESIGN LO AND REVERSE PIPE, SEAL AND RELATED COMPONENTS
1987 6000, SUNBIRD AND FIERO MODELS EQUIPPED WITH THM 125C TRANSAXLES
BULLETIN COVERS:
A new design lo/reverse pipe, seal and components was implemented on all Windsor built 125C transaxles built between the dates of January 12, 1987 and April 6, 1987 (Julian Dates 012 - 096). This temporary change included a case with a machined boss, retainer bracket, reverse oil pipe and reverse oil seal.
NOTICE: To assist in identification, the parts catalog refers to these changes as Second Design..
Figure 1 - THM 125/125C Transaxle Identification Information Windsor, Canada:
DATE OF PRODUCTION CHANGE: (Figure 1)
New design lo/reverse pipe, seal and components implemented on all Windsor transaxles built between January 12, 1987 (Julian date 012) and April 6, 1987 (Julian date 096).
Figure 2 - Lo/Reverse Pipe and Seal:
SERVICE PARTS INFORMATION: (Figure 2)
To service the new design lo/reverse pipe seal and related components order the following:
PART NUMBER DESCRIPTION
8664493 Pipe, Reverse Oil
(Second Design)
8664492 Seal, Reverse Oil
(Second Design)
8664494 Retainer, Reverse Oil
Pipe (Second Design)
8664495 Bolt M8X1.25X14
(Second Design)
To service a new design case (with machined boss) for any reason, or a first design case (part number 8653918) and first design lo/reverse pipe, seal and components (refer to parts catalog for first design part numbers).
SERVICE MANUAL REFERENCE:
Refer to appropriate section of service manual for replacement procedures.