Oil Charge

DA-6 COMPRESSOR SYSTEM 240ml (8 fl oz)
R-4 COMPRESSOR SYSTEM 180ml (6 fl oz)

NOTE: Use 525 viscocity refrigerant oil for all compressors.

New oil quantities must be added to the system during component replacement as follows:

^ Compressor - Remove, drain oil, measure, replace same amount of new oil.
^ Evaporator - Add 60ml (2 fl oz).
^ Condenser - Add 30ml (1 fl oz).
^ Accumulator - Remove, drain oil, measure, replace same amount of new oil as drained, plus 60 ml (2 fl oz) to compensate for that retained by the original accumulator desiccant. If no oil can be drained from old accumulator, add 60 ml (2 fl oz) of new oil to the new accumulator.