Fuel Pump: Service and Repair

1. Disconnect battery ground cable, then drain fuel tank.
2. Disconnect tank unit wire from connector in rear compartment.
3. Remove ground wire retaining screw from under body.
4. Disconnect hoses from tank unit.
5. Support fuel tank and disconnect the two fuel tank retaining straps.
6. Remove fuel tank from vehicle.
7. Remove fuel gage retaining cam, using tool J-24187, or other suitable tool.
8. Remove sending unit from tank.
9. Electric fuel pump can be unbolted from tank sending unit after sending unit has been removed.
10. Reverse procedure to install.