Alignment - Revised Specifications

88pontiac01
Bulletin Number: 88-3-11
Reference Number: 833102
Publish Date: 1/88
Subject: SERVICE MANUAL UPDATE REVISED WHEEL ALIGNMENT SPECIFICATIONS

Models

Affected: 1988 FIERO




The 1988 Fiero Service Manual Section 3A, Figure 5, Wheel Alignment Specifications Revised. See Illustration..
^ Vehicle must be jounced three times before checking alignment, to eliminate false geometry readings.

^ Front toe adjustment to be set separately per wheel, with steering wheel held in "straight-ahead" position within +/- 5.0~.

^ Front & rear cross car camber must be within 0.75~.

^ Front cross car caster must be within 0.75~.

^ Tie rod boot must not be twisted and must be seated in tie rod groove.