Disassembly

Fig. 23, Differential & ring gear components:

Refer to Fig. 23 for disassembled view of differential and ring gear assembly.
Tools J-2241-11 or J-23598, J-22888 and J-22888-35 are required to conduct the following procedure.

1. Remove attaching bolts (77).
2. Remove ring gear (70).
3. Remove bearings (75 and 60), using tools J-22888, J-22888-35 and J-2241-11, or J-23598 or equivalents.
4. Remove speedometer gear (71 or 72). Removal of (71) will destroy gear.
5. Remove attaching bolt (68) and washer (69).
6. Remove pin (63).
7. Remove gears (67) and washer (64), gears (66) and washer (65).

Inspection

Inspect all components for excessive wear and/or damage. Replace worn or damaged components as required.