| Standard Hours | Manufacturer Warranty Hours | Skill Level | Notes |
| Replace |
| Add Following Operations If Performed With Piston & Ring Jobs |
| Main Bearings, Renew | 2.8 | 0.0 | A | Add The Following Operations If Performed Along With Piston And Ring Jobs. |
| Crankshaft, Renew | 3.7 | 0.0 | A | Add The Following Operations If Performed Along With Piston And Ring Jobs. |
| Oil Pump, Renew | 2.3 | 0.0 | A | Add The Following Operations If Performed Along With Piston And Ring Jobs. |
| Oil Pump Screen, Clean | 0.2 | 0.0 | A | Add The Following Operations If Performed Along With Piston And Ring Jobs. |
| Rear Main Oil Seal, Renew | 2.0 | 0.0 | A | Add The Following Operations If Performed Along With Piston And Ring Jobs. |
| Timing Gears, Renew |
| Camshaft Gear | 3.4 | 0.0 | A | Add The Following Operations If Performed Along With Piston And Ring Jobs. |
| Crankshaft Gear | 1.0 | 0.0 | A | Add The Following Operations If Performed Along With Piston And Ring Jobs. |
| Tune-Up | 0.5 | 0.0 | A | See Valves Grind Head Removed And Combinations. |
| One Cylinder | 11.5 | 8.2 | A | Includes: R&R Cylinder Head & Oil Pan, Hone Cylinder Walls And Plastigage Bearings. |
| Note |
| With AC, Add | 0.5 | 0.3 | | Includes: R&R Cylinder Head & Oil Pan, Hone Cylinder Walls And Plastigage Bearings. |
| With Cruise Control, Add | 0.4 | 0.2 | | Includes: R&R Cylinder Head & Oil Pan, Hone Cylinder Walls And Plastigage Bearings. |
| All Cylinders | 13.3 | 9.5 | A | Includes: R&R Cylinder Head & Oil Pan, Hone Cylinder Walls And Plastigage Bearings. |
| Note |
| With AC, Add | 0.5 | 0.3 | | Includes: R&R Cylinder Head & Oil Pan, Hone Cylinder Walls And Plastigage Bearings. |
| With Cruise Control, Add | 0.4 | 0.2 | | Includes: R&R Cylinder Head & Oil Pan, Hone Cylinder Walls And Plastigage Bearings. |
| One CYL |
| Note |
| With Cruise Control, Add | 0.4 | 0.2 | | Includes: R&R Cylinder Head & Oil Pan, Hone Cylinder Walls And Plastigage Bearings. |
| Each Additional | 1.0 | 0.7 | A | Includes: R&R Cylinder Head & Oil Pan, Hone Cylinder Walls And Plastigage Bearings. |
| Note |
| With AC, Add | 0.5 | 0.3 | | Includes: R&R Cylinder Head & Oil Pan, Hone Cylinder Walls And Plastigage Bearings. |
| With Cruise Control, Add | 0.4 | 0.2 | | Includes: R&R Cylinder Head & Oil Pan, Hone Cylinder Walls And Plastigage Bearings. |
| One CYL Each Bank |
| Note |
| With Cruise Control, Add | 0.4 | 0.2 | | Includes: R&R Cylinder Head & Oil Pan, Hone Cylinder Walls And Plastigage Bearings. |
| Without Fuel Injection |
| Note |
| With Cruise Control, Add | 0.4 | 0.2 | | Includes: R&R Cylinder Head & Oil Pan, Hone Cylinder Walls And Plastigage Bearings. |
| With Fuel Injection |
| Note |
| With Cruise Control, Add | 0.4 | 0.2 | | Includes: R&R Cylinder Head & Oil Pan, Hone Cylinder Walls And Plastigage Bearings. |