| Standard Hours | Manufacturer Warranty Hours | Skill Level | Notes |
| Replace |
| One Cylinder |
| Note |
| With Cruise Control, Add | 0.4 | 0.2 | | Includes: R&R Cylinder Head & Oil Pan, Hone Cylinder Walls And Plastigage Bearings. |
| All Cylinders |
| Note |
| With Cruise Control, Add | 0.4 | 0.2 | | Includes: R&R Cylinder Head & Oil Pan, Hone Cylinder Walls And Plastigage Bearings. |
| Add Following Operations If Performed With Piston & Ring Jobs |
| Main Bearings, Renew | 1.5 | 0.0 | A | Add The Following Operations If Performed Along With Piston & Ring Jobs. |
| Crankshaft, Renew | 5.8 | 0.0 | A | Add The Following Operations If Performed Along With Piston & Ring Jobs. |
| Oil Pump, Renew | 0.9 | 0.0 | A | Add The Following Operations If Performed Along With Piston & Ring Jobs. |
| Oil Pump Screen, Clean | 0.2 | 0.0 | A | Add The Following Operations If Performed Along With Piston & Ring Jobs. |
| Rear Main Oil Seal, Renew |
| Auto Trans | 2.2 | 0.0 | A | Add The Following Operations If Performed Along With Piston & Ring Jobs. |
| Timing Chain or Gears, Renew | 2.2 | 0.0 | A | Add The Following Operations If Performed Along With Piston & Ring Jobs. |
| Tune-Up | 0.6 | 0.0 | A | Add The Following Operations If Performed Along With Piston & Ring Jobs. |
| One CYL |
| Note |
| With AC, Add | 0.8 | 0.5 | | Includes: R&R Cylinder Head & Oil Pan, Hone Cylinder Walls And Plastigage Bearings. |
| With A.I.R., Add | 0.8 | 0.5 | | Includes: R&R Cylinder Head & Oil Pan, Hone Cylinder Walls And Plastigage Bearings. |
| With Cruise Control, Add | 0.4 | 0.2 | | Includes: R&R Cylinder Head & Oil Pan, Hone Cylinder Walls And Plastigage Bearings. |
| With C.C.C., Add | 0.5 | 0.3 | | Includes: R&R Cylinder Head & Oil Pan, Hone Cylinder Walls And Plastigage Bearings. |
| One CYL Each Bank |
| Note |
| With AC, Add | 0.8 | 0.5 | | Includes: R&R Cylinder Head & Oil Pan, Hone Cylinder Walls And Plastigage Bearings. |
| With Cruise Control, Add | 0.4 | 0.2 | | Includes: R&R Cylinder Head & Oil Pan, Hone Cylinder Walls And Plastigage Bearings. |
| With C.C.C., Add | 0.5 | 0.3 | | Includes: R&R Cylinder Head & Oil Pan, Hone Cylinder Walls And Plastigage Bearings. |
| With A.I.R., Add | 0.8 | 0.5 | | Includes: R&R Cylinder Head & Oil Pan, Hone Cylinder Walls And Plastigage Bearings. |
| Without Fuel Injection |
| Note |
| With AC, Add | 0.8 | 0.5 | | Includes: R&R Cylinder Head & Oil Pan, Hone Cylinder Walls And Plastigage Bearings. |
| With Cruise Control, Add | 0.4 | 0.2 | | Includes: R&R Cylinder Head & Oil Pan, Hone Cylinder Walls And Plastigage Bearings. |
| With C.C.C., Add | 0.5 | 0.3 | | Includes: R&R Cylinder Head & Oil Pan, Hone Cylinder Walls And Plastigage Bearings. |
| With A.I.R., Add | 0.8 | 0.5 | | Includes: R&R Cylinder Head & Oil Pan, Hone Cylinder Walls And Plastigage Bearings. |
| With Fuel Injection |
| One CYL | 13.0 | 9.3 | A | Includes: R&R Cylinder Head & Oil Pan, Hone Cylinder Walls And Plastigage Bearings. |
| One CYL Each Bank | 16.1 | 11.5 | A | Includes: R&R Cylinder Head & Oil Pan, Hone Cylinder Walls And Plastigage Bearings. |
| All Cyls | 17.8 | 12.7 | A | Includes: R&R Cylinder Head & Oil Pan, Hone Cylinder Walls And Plastigage Bearings. |
| Note |
| With AC, Add | 0.8 | 0.5 | | Includes: R&R Cylinder Head & Oil Pan, Hone Cylinder Walls And Plastigage Bearings. |
| With Cruise Control, Add | 0.4 | 0.2 | | Includes: R&R Cylinder Head & Oil Pan, Hone Cylinder Walls And Plastigage Bearings. |
| With C.C.C., Add | 0.5 | 0.3 | | Includes: R&R Cylinder Head & Oil Pan, Hone Cylinder Walls And Plastigage Bearings. |
| With A.I.R., Add | 0.8 | 0.5 | | Includes: R&R Cylinder Head & Oil Pan, Hone Cylinder Walls And Plastigage Bearings. |