Wiper Gear Box: Service and Repair

1. Disable airbag system as described under MAINTENANCE PROCEDURES/AIRBAG SYSTEM DISARMING.
2. On 1992 models, disconnect washer hoses.
3. On all models, remove wiper arms.
4. Remove air inlet screen assembly.
5. Disconnect drive link from motor crank arm.
6. Remove linkage attaching screws, the pull transmission through access hole in shroud upper panel.
7. Reverse procedure to install.
8. Rearm airbag system as described under MAINTENANCE PROCEDURES/AIRBAG SYSTEM DISARMING.