Operation CHARM: Car repair manuals for everyone.

Forward & Direct Clutch






1. Align clutch plates, position direct clutch housing, then install forward clutch assembly, shaft first into direct clutch. Hold direct clutch housing, then rotate forward clutch back and forth until forward clutch is completely seated. When forward clutch is seated, it will be approximately 5/8 inch, from tang end of the direct clutch housing to end of forward clutch drum.

2. Position direct and forward clutch assembly with forward clutch shaft facing up, to prevent separation.

3. Install forward and direct clutch endplay checking fixture J-29337, or equivalent, onto direct and forward clutch assemblies.

4. Install direct and forward clutch assemblies into transmission, then rotate assembly into position. The direct clutch housing will be approximately 4 1/8 inches from oil pump face in case when correctly seated.

5. Remove J-29337 from direct and forward clutch assembly.