Body - Updated Procedure For Front Grille R&R
89Pontiac24Bulletin Number: 89-2-3
Reference Number: 972004
Publish Date: 11/89
Subject: SERVICE MANUAL UPDATE - SECTION 2C (REVISED PROCEDURE FOR GRILLE R AND R OR REPLACE)
Models
Affected: 1989 GRAND AM
To ensure proper engagement of the lock tabs of the grille to the headlamp support, during service or replacement, the following procedure should be used. Please mark a reference to this change on Page 2C-4 of your 1989 Grand AM Service Manual.
Procedure:
REMOVE OR DISCONNECT
Loosen energy absorber to bumper bar nuts to allow fascia to lower slightly.
Gently lift upper grille tabs.
R and R grille assembly
INSTALL OR CONNECT
Lower grille tabs into slots.
Grille assembly.
Position fascia for even 8.0 mm (.315") spacing below grille and tighten energy absorber to bumper bar nuts (30 N-m/22 ft. lbs.)