With TBI

Adjust cable as follows:
1. Assemble cable in cable bracket and servo bracket.
2. Rotate TBI lever so its stud engages hole in cable end.
3. Assemble cable to TBI lever stud with retainer, then release TBI cable.
4. Pull servo end of cable toward servo without moving TBI lever.
5. If a hole in servo tab aligns with cable pin, connect pin to tab with retainer.
6. If a tab hole does not align with pin, move cable away from servo until next closest tab hole aligns with pin, then connect pin to tab with retainer. Do not stretch cable to make a particular tab hole connect to pin.