Condenser HVAC: Service and Repair

Condenser Mounting:

REMOVE OR DISCONNECT
1. Discharge A/C system.
2. Unclip plastic covers over condenser.
3. Hood latch assembly.
4. Brazed nut connections at condenser and discard O-ring seals.
5. Front grille molding braces.
6. Headlamp bezel.
7. Front grille and set aside.
8. Condenser hold-downs and disconnect splash shields.
9. Carefully remove condenser.
10. Transfer bracket (if necessary).


INSTALL OR CONNECT
1. Condenser.
2. Condenser hold-downs and splash shield.
3. Front grille.
4. Headlamp bezel.
5. Front grille molding braces.
6. Brazed nut connections at condenser using new O-ring seals.
7. Hood latch.
8. Plastic covers.
9. Evacuate and recharge A/C system with 1.02 kg (2.25 lbs.) of R-12.