Troubleshooting Hints

TROUBLESHOOTING HINTS

- Try the following checks before doing the System Check.

1. Check the key pellet sensing contacts in the Ignition Lock Cylinder by looking into the key opening. If the contacts are damaged, replace the Lock Cylinder.
2. Check the VATS Fuse by visual inspection.
3. Check owner's ignition key using the J35628 Interrogator or equivalent. If the Key Code window shows "E", replace the owner's key.
4. Check the Security Indicator Bulb.
5. Check the ECM IGN and GAGES Fuse by visual inspection.

- Go to System Check for a guide to normal operation.

- Go to System Diagnosis for diagnostic tests.