Initial Inspection and Diagnostic Overview

INSPECTION OF THE REFRIGERANT SYSTEM
If a malfunction in the refrigerant system is suspected, check the following:
1. Check outer surfaces of radiator and condenser cores to be sure air flow is not blocked by dirt, leaves or other foreign material. Be sure to check between the condenser and radiator as well as the outer surfaces.
2. Restrictions or kinks in the condenser core, hoses, tubes, etc.
3. Blower motor operation.
4. Refrigerant leaks
5. Check all air ducts for leaks or restrictions. Low air flow rate may indicate a restricted evaporator core.
6. Compressor clutch slippage.
7. Improper drive belt tension.
8. Plugged accumulator or expansion (orifice) tube.
9. Excessive moisture in the refrigerant system.
10. Cooling fan for normal operation.
11. Coolant thermostat for normal operation.