A/T - SRTA Model Update
90pontiac15Bulletin Number: 90-7-42A
Reference Number: 077116R
Publish Date: 7/90
Subject: SERVICE REPLACEMENT TRANSMISSION ASSEMBLY (SRTA) MODEL UPDATE
Models
Affected: 1984-90 ALL MODELS W/4T60 (440-T4)
SEE BULLETIN # 90742A, DATED 07/90 FOR UPDATED 440-T4 INFORMATION
This bulletin supersedes bulletin 90-7-42 issued 6/90. This bulletin is being updated to include additional models on the chart that were omitted from bulletin 90-7-42.
BULLETIN COVERS:
This bulletin expands the list for all SRTA model applications. The SRTA Model Replacement Chart offers a complete list of the 1984 through 1990 SRTA models offered by Hydra-matic.
SRTA ADVANTAGES:
- A SRTA is the product of a highly successful, customer satisfaction driven program providing the technician with a service alternative when addressing diagnostic and overhaul concerns.
- All SRTA units are designed and remanufactured to current engineering specifications and are often less costly than major overhaul.
- GMSPO Parts Distribution Centers are committed to 48 hour maximum delivery time for all SRTA models, with no VIP charges.
IN THE INTEREST OF CUSTOMER SATISFACTION, SRTA MODELS SHOULD ONLY BE CONSIDERED WHEN THE PROJECTED COST OF REPAIR EXCEEDS THE COST OF A SRTA REPLACEMENT.
SERVICE NOTE:
Cooler flushing MUST be performed whenever a transmission/transaxle is removed for service. It is essential to flush the cooler after SRTA installation, major overhaul, in any case of pump or torque converter replacement, or when fluid contamination is suspected. Time allowance has been added to operation K7000 (Transmission Removal and Replacement) for 1987 and 1988 models. Add 0.6 hours to Removal and Replacement allowances for 1982 through 1986 models.
SRTA MODEL REPLACEMENT CHART: