Seats - Back Rattle at Lower Pivot Pin

91pontiac16

Bulletin Number: 92-10-25
Reference Number: 831023R
Publish Date: 12/91


Subject: PASSENGER AND/OR DRIVERS SEAT BACK RATTLE AT LOWER PIVOT PIN (INSTALL WASHERS)


Models Affected: 1988-92 GRAND PRIX MODELS





This bulletin applies to 1988-92 Grand Prix models with AR9, AM6, AN3 or AQ9 seat options. This bulletin is in addition to bulletins 90-10-5 issued 11/89 and 88-10-27 issued 5/88.

Seat back rattle or chucking may be repaired by installing two (2) wavy washers, P/N 17967750, and one flat washer, P/N 17967025 as described and illustrated. This repair should be applied to both passenger and drivers seat.

Parts are currently available from GMSPO.

1. Remove front seat back as described in Section 10 of the Service Manual.

2. Install one flat and two wavy washers as illustrated.

3. Reinstall seat back and torque all bolts to specified values as called for in the Service Manual, Section 10.

Labor Operation Number: T1336
Labor Time: .5 Hours