Mechanical Specifications

TIGHTENING SPECIFICATIONS

All fuel line fittings 30 Nm (22 lb.ft.)
Fuel lines to TBI body 27 Nm (20 lb.ft.)
Fuel inlet/outlet nuts to throttle body 41 Nm (30 lb.ft.)
Idle Air Control Valve (IAC) screws 3.0 Nm (27 lb. in.)
TBI attaching bolts 17 Nm (12 lb.ft.)
TPS attaching screws 2.0 Nm (18 lb.in.)
Injector retainer 3.0 Nm (27 lb. in.)
Pressure regulator cover 2.4 Nm (21 lb. in.)
Fuel meter body to throttle body 3.5 Nm (31 lb. in.)
Tube module assembly 3.0 Nm (27 lb. in.)
Engine compartment fuel pipe nuts 30 Nm (22 lb. ft.)
Rear fuel tank retaining strap bolts 33 Nm (25 lb.ft.)