Guide Track Lubricating Instructions
(To be performed every 6 months/6,000 miles whichever comes first.)The following procedure should be performed on both the driver side and the passenger side of the vehicle.
1. Turn the ignition off and remove the key from the ignition switch.
2. Unbuckle the motorized shoulder belt by pushing the button on the buckle at the top of the belt in the guide track rail.
3. In the guide track rail (see Figure 1), locate the carrier slot as shown in Figure 2.
4. Attach short curved plastic extension tube on the grease applicator (approximately 1/3 of a tube of grease will be required).
NOTICE:
The recommended grease (General Motors Service Parts Organization # 12346288) is required due to its lubricating properties.
5. Apply a small portion of the guide track grease at the 12 points over the length of the carrier slot shown in Figure 3.
6. On the guide track rail (shown in Figure 1) locate the secondary contact surface as shown in Figure 2.
7. Apply a small portion of guide track grease at the 5 points on the secondary contact surface of the guide track rail as shown in Figure 3.
8. Reconnect the motorized shoulder belt buckle to the buckle in the guide track rail and cycle several times to ensure proper distribution of lubricant.