Instrument Cluster Replacement

Fig. 13 Removing Cluster Pad:

1. Call up and record maintenance reminder mileage, if equipped w/driver information center (DIC).
2. Disconnect battery ground cable.
3. Remove center and lefthand lower instrument panel trim plates.
4. Remove cluster pad, Fig. 13, then air duct.
5. Remove cluster attaching screws, then pull cluster rearward, this will disengage two cluster connectors.
6. Disconnect DIC connector, located in a cable about one foot from cluster, if equipped.
7. Remove cluster from vehicle.
8. Reverse procedure to install.