Control Assembly Replace

Heater And A/C Control Assembly Wiring:

Temperature Control Cable:

Vacuum Hoses - Passenger Compartment:

REMOVE OR DISCONNECT
1. Center Instrument Panel (I/P) trim plate.
2. Four (4) heater and A/C control assembly retaining screws.
3. Pull assembly out slightly.
4. Electrical (2) and vacuum connectors.
5. Temperature cable.
6. Heater and A/C control assembly.

INSTALL OR CONNECT
1. Temperature cable to control assembly.
2. Electrical (2) and vacuum connectors to heater and A/C control assembly.
3. Four (4) heater and A/C control assembly retaining screws.
4. Center I/P trim plate.