Radio Replacement

When installing radio, be sure to adjust antenna trimmer for peak reception. Also, be sure to connect speaker before applying power to radio.
1. To avoid personal injury when servicing models equipped with Supplemental Inflatable Restraint (Airbag) System, temporarily disarm system. Refer to Air Bags and Seat Belts/Air Bags (Supplemental Restraint Systems)/Service and Repair.
2. Disconnect battery ground cable.
3. Remove three console bezel and four radio to console attaching screws.
4. Pull radio outward and disconnect electrical connector, then remove radio.
5. Reverse procedure to install.
6. After completing service procedure activate Supplemental Inflatable Restraint (Airbag) System. Refer to MAINTENANCE PROCEDURES/AIRBAG SYSTEM DISARMING.