Unlocking Secured Radio After A Power Loss

UNLOCKING SECURED RADIO AFTER POWER LOSS

UNLOCKING SECURED RADIO:

When battery power is reapplied to a secured radio, the radio won't turn on and "LOC" appears on the display. Enter the secret customer or factory backup code as follows: (Do not pause more than 15 seconds between steps.)

1. Turn ignition on to "ACC" or "RUN" position.
2. Press "SET" and "000" appears on the display.
3. Press "SEEK A " or "SEEK Y " and hold until the first digit of the secret code appears.
4. Press "TUNE A" or "TUNE Y "and hold until the second and third digits appear.
5. Press "AM-FM" and "000" appears on the display.
6. Press "SEEK A" or "SEEK""" and hold until the fourth digit of th secret code appears.
7. Press "TUNE A" or "TUNE Y "and hold until the fifth and sixth digits of code appears.
8 Press "AM-FM" ("SEC" appears and radio can be turned on). Radio stays in secured mode. To remove the customer code and deactivate the security feature, the factory unlocking code must be entered again, repeating steps 2 through 8.