Wheels (Aluminum) - Coated Balance Weight Usage

9220pontiac01

Bulletin Number:
92-3-13
Reference Number:
293502
Publish Date:
3/92


Subject:
INFORMATION ON COATED
BALANCE WEIGHT USAGE
FOR ALUMINUM WHEELS

Models
Affected:
1983-92 ALL MODELS


Wheel balance weights are now available through GM Dealer Equipment at a very attractive price. These are original equipment weights that will assure best fit to GM original equipment wheels. The AW series and MC series of polyester coated weights are offered for aluminum wheels. IT IS IMPERATIVE THAT COATED WEIGHTS BE USED ON ALUMINUM WHEELS TO PREVENT COSMETIC DAMAGE TO THE WHEEL. A plastic tipped hammer should also be used to prevent damage to the weight's coating during installation.

Uncoated XT type weights are also offered for passenger car steel wheels.

Usage of AW and MC weights on aluminum wheels by GM vehicle line is shown below. Using the incorrect type of weights will result in improper fit, and such weights may fall off the wheel. This information should be posted near the wheel balancer to aid in weight selection.

"We believe this source and their equipment to be reliable. There may be additional manufacturers of such equipment. General Motors does not endorse, indicate any preference for or assume any responsibility for the products or equipment from this firm or for any such items which may be available from other sources."





POLYESTER COATED BALANCE WEIGHTS FOR ALUMINUM WHEELS





These are the only approved weights by GM for GM cars & light trucks.





ORDER FORM