Rocker Molding - Paint Peeling

90pontiac17
Bulletin Number: 91-10-1A
Reference Number: 03103OR
Publish Date: 6/90
PAINT PEELING FROM LEFT REAR Subject:
ROCKER MOLDING (REPLACE FAILED QUARTER MOLDING)
Models
Affected: 1991 FIREBIRD MODELS

This bulletin cancel and replaces bulletin 91-10-1 issued 6/90. This bulletin has been revised to change the labor time from .2 to .5.

Application: Early 1991 Pontiac Trans Am, GTA or Firebird models With W68 Appearance Package.

Condition: Paint peels or flakes from upper surface of left side quarter molding (near area of body contact) located behind rear tire opening.

Cause: Sufficient adhesion promoter may not have been applied to the part during the paint process.

Correction: Replace failed quarter molding using procedure outlined in the Service Manual (page 10-6-5).

Important: New, painted parts are to be obtained from the supplier. The parts will be shipped overnight and should be received the following day.

To order parts, contact: Joe Adado
Vemco Inc.
(313) 695-7232 Between 8 AM and 4 PM EST.

The VIN and the Vehicle Color Code will be needed when ordering new parts.

Important: Failed parts should be returned to the supplier upon request. (Shipped C.O.D.)

Labor Operation Number: T1622
Labor Time : 0.5 Hours