Instrument Cluster Replacement

Fig. 6 Instrument Cluster Trim Plate Attaching Screw Locations:

Fig. 7 Instrument Cluster:

1. Disconnect battery ground cable.
2. Remove turn signal switch housing attaching screws and the housing. Rotate steering wheel as necessary to gain access to all screws.
3. Remove two instrument panel trim plate attaching screws and the trim plate, Fig. 6.
4. Depress speedometer cable retainer spring and disconnect cable from cluster.
5. Remove instrument cluster attaching screws.
6. Disconnect electrical connectors from cluster, then remove cluster from vehicle, Fig. 7.
7. Reverse procedure to install.