Powertrain Management: Technical Service Bulletins
- Recalls
- Customer Interest
- Electrical - MIL ON/DTC's Set By Various Control Modules
- Electrical - Intermittent MIL/DTC P2138/Reduced Power
- Ignition - Startability/Performance When Cold or Damp
- Engine - Poor Cold/Warm Driveability
- Engine - Miss, Hesitation, or Roughness
- Engine - Miss, Hesitation, or Roughness
- Engine, A/T - Shift/Driveability Concerns/MIL ON
- By Symptom
- Abnormal wear/deterioration
- Customer Interest
- Electrical - MIL ON/DTC's Set By Various Control Modules
- Electrical - Intermittent MIL/DTC P2138/Reduced Power
- Ignition - Startability/Performance When Cold or Damp
- Engine - Poor Cold/Warm Driveability
- Engine - Miss, Hesitation, or Roughness
- Engine - Miss, Hesitation, or Roughness
- Engine, A/T - Shift/Driveability Concerns/MIL ON
- Driveability
- Erratic Operation
- Erratic Shifting
- High emissions
- Poor performance
- Recalls
- Starting problems
- All Technical Service Bulletins
- Vehicle - Engine And Sub Systems Flushing Info. (CANADA)
- Vehicle - Engine And Sub-Systems Flushing Recommendations
- Engine - THIS BULLETIN HAS BEEN CANCELED
- Fuel System - Fuel Injector Maintenance Cleaning
- Fuel System - GM Fuel System Treatment PLUS(R) Info.
- Electrical - MIL ON/DTC's Set By Various Control Modules
- Electrical - Intermittent MIL/DTC P2138/Reduced Power
- I/M 240 Repairs - Obtaining Technical Assistance
- Tools - Revised Injector Tester
- Tools - Introduction Of The Fuel Injector Tester
- ECM/PCM - Damaged and/or Mis-Diagnosed
- Oxygen Sensors - Silica Contamination
- Ignition - Startability/Performance When Cold or Damp
- Recall - Emission System Modification
- Engine - Poor Cold/Warm Driveability
- ECM/PCM - Circuit Board Damage Prevention
- PROM - Powertrain Control Module Reprogramming
- Engine - Miss, Hesitation, or Roughness
- Engine - Miss, Hesitation, or Roughness
- Ignition - Precautions On Use of Spark Tester
- Fuel - Revised Sender Replacement Caution/Notices
- Emission Systems - State Testing Information
- Enhanced IM240 Program - Implementation Plan
- Emission - Enhanced Inspection Maintenance Programs
- I/M 240 Program - Equipment Purchase
- I/M Emissions Diagnostic Manual -Program
- Enhanced Emission I/M - Program Update
- Enhanced Emission Inspection Maintenance - Equipment
- Warranty - Guidelines for I/M 240 Labor
- EVAP System - Service of Connectors
- Oxygen Sensor Test - Revised Tech 1 Mass Storage CD
- PCM - Returned Product Feedback Program
- PROM/MEMCAL - Identification Marks
- Fuel - How Fuel Economy Is Determined
- Timing Pointer On the Cam Belt Cover - Missing
- Fuel - Reformulated/Oxygenated Gasolines
- Engine, A/T - Shift/Driveability Concerns/MIL ON
- Fuel System - E85 Fuel Usage Precaution
- Engine/Fuel System - Oil/Fuel Additive Information
- Fuel System - TOP TIER Detergent Gasoline (Canada)
- Fuel System - TOP TIER Detergent Gasoline