Without Electrochromic Mirrors

The Power Mirrors are adjusted from the interior of the vehicle by moving the Outside Mirror Control Switch in the desired direction.
Each Outside Mirror has two reversible motors. One adjusts the mirror view up and down, the other adjusts the mirror view right and left. The driver operates either an Up-Down Switch or Left-Right Switch to control the polarity of the voltage to the motors. The Mirror Select Switch directs these control voltages to either the RH or LH Outside Mirror.
With the Mirror Select Switch in the L position and the Mirror Position Switch held in the up position, battery voltage from the ORN wire is applied through the up contact of the Mirror Position Switch to the YEL wire at terminal C and to the Up-Down Motor in the LH Outside Mirror. The LH Outside Mirror Up-Down Motor has a path to ground through the LT GRN wire at terminal E, through the Mirror Select Switch, the up contact of the Mirror Position Switch and the BLK wire. The LH Outside Mirror Up-Down Motor runs and turns the mirror UP. When the Mirror Position Switch is pushed to the down position, the LH Outside Mirror Up-Down Motor receives voltage; however, the polarity is reversed. The YEL wire is now grounded and voltage is applied to the motor through the LT GRN wire. The motor runs in the opposite direction.
The LH Outside Mirror Left-Right Motor operates similarly. When the Mirror Position Switch is moved to the left position, battery voltage from the ORN wire is applied through the L contacts of the Mirror Select Switch to the LT BLU wire at terminal B and the Left-Right Motor in the LH Outside Mirror. The LH Outside Mirror Left-Right motor is grounded through the WHT wire at terminal D, the Left-Right Switch and BLK wire. The LH Outside Mirror Left-Right Motor runs and turns the mirror to the left.
If the Left-Right Switch is pushed to the right position, the same motor receives voltage; however, the polarity is reversed. With the LT BLU wire grounded, voltage is now applied to the motor through the WHT wire. The motor runs in the opposite direction.
The RH Outside Mirror works similarly to the LH Outside Mirror when the Mirror Select Switch is moved to the R position and the Up-Down and Left-Right Switches are operated.