With Driver Only SIR

Programmer Assembly & Temperature Valve Link:

REMOVE OR DISCONNECT

1. Right sound insulator.

2. Instrument Panel (I/P) compartment (glove box).

3. Temperature valve link rod.

4. Electrical and vacuum connectors.

5. Programmer screws and programmer.

ADJUST

- Before connecting temperature valve link rod during installation, do the "Temperature Valve Link Adjustment". Refer to procedure under Adjustments. Adjustments

INSTALL OR CONNECT

1. Programmer and mounting screws.

- Tighten Screws to 1.4 Nm (12 lb. in.).

2. Electrical and vacuum connectors.

3. Temperature valve link.

4. I/P compartment (glove box).

5. Right sound insulator.