Update Change Summary
UPDATE CHANGE SUMMARY
CARLINE: PONTIAC BONNEVILLE SE
Page(s) Revision
8A-10-1, The 3 RED (1441) wires between Fuse 6 and terminal F of connector C1 of the Head/Park Light Switch
8A-12-0, is changed to 5 RED (1441)
8A-101-0
8A-10-2, The .8 ORN (440) wires between terminal H8 of connector C260 and the Powertrain Control Module (PCM)
8A-20-0 are changed to 1 ORN (440).
8A-11-4, The .8 ORN (40) wires at splice S207 (Power Feed For Multi-Function Chime (MFC) Module and Oil Level
8A-76-0, Module) are changed to .5 ORN (40).
8A-80-2,
8A-81-2
8A-11-6, Change the .5 BRN (250) wires at splice S104 to .35 BRN (250).
8A-20-5,
8A-31-0
8A-14-1, The .5 BLK (151) wire in terminal B of connector C2 of the LH Composite Headlight Assembly is changed
8A-100-0, to .8 BLK (151).
8A-101-1
8A-14-2, The .8 wires to the Blower Resistor Assembly and the Blower Relay are changed to 1.
8A-63-0
8A-14-2 The 1 BLK (155) wire at the RH Fog Light is changed to .8 BLK (155).
8A-100-1
8A-101-2
8A-14-4 The .8 BLK (152) wire between splice S225 and in-line connector C205 is changed to .5 BLK (152).
8A-20-3, The .5 YEL (400) wire between terminal D14 of connector C3 of the Powertrain Control Module (PCM)
8A-33-0, and terminal P9 of in-line connector C260 is changed to .35 YEL (400).
8A-34-1
8A-20-5, The .35 BRN (86) wire between the Cruise/Shift Interlock/Brake Switch and terminal D1O of connector
8A-34-0 C1 of the Powertrain Control Module (PCM) is changed to .5 BRN (86).
UPDATE CHANGE SUMMARY
CARLINE: PONTIAC BONNEVILLE SE
Page(s) Revision
8A-44-2, The .5 TAN (800) wires at terminal 42 of the Electronic Brake Control Module (EBCM), terminal
8A-47-0, A8 of the Diagnostic/Energy Reserve Module (DERM), and at terminals C and H of connector
8A-50-0 C2 of the Remote Accessory (RAC) Control Module is changed to .8 TAN (800).
8A-45-0 The .5 BLK (1387) wire at the TFE Steering Solenoid is changed to .5 DK GRN/WHT (1387).
8A-45-0, The .8 BLK (1387) wire between terminal B8 of the Multi-Function Chime (MFC) Module and terminal E1 of connector
8A-76-0 C260 is changed to .8 DK GRN/WHT (1387).
8A-64-0 The .8 DK GRN/YEL (762) wire between in-line connector C200 and the A/C High Pressure Cut-Out Switch
is changed to 1 LT GRN (66).
8A-64-0 The .8 DK BLU (204) wire at terminal B of the A/C High Pressure Cut-Out Switch is changed to 1 DK BLU (204).
8A-112-0 The .5 RED (1324) wires to the Tail/Back Up Light Assemblies are changed to .8 LT GRN (24).
8A-115-0 The terminal at in-line connectors C701 and C801 between the Rear Door Courtesy Lights and Splice S211 is
changed to C.