General

1. Check I/P Fuse Block Fuse 25 by visual inspection.
2. Check that the Wiper/Washer Switch connectors are mated correctly.
3. If Wipers cycle in and out of Park position in HI, and do not operate in LO, MIST or PULSE, check YEL (196) wire for an open.
4. If the Wiper Motor runs but the wiper blades do not, check the wiper linkage at the wiper crank arm.
5. If the Windshield Washer does not operate, check that:
- Washer reservoir is filled.
- Hoses are not pinched or kinked.
- Hoses are correctly attached.
- Nozzles are not clogged.
6. If Wipers work in LO, but not in MIST, replace the Wiper/Washer Switch.