Radio, Stereo, and Compact Disc: Description and Operation

CIRCUIT OPERATION:

The RADIO Fuse provides power to the Radio Receiver and to the Power Antenna. With the Ignition Switch in ACCY or RUN, voltage is applied through the RADIO Fuse and the YEL wire to the On-Off Switch in the Radio Receiver. The circuit is grounded at G200. With the On Off Switch closed, voltage is applied from the RADIO Fuse to the Radio On Signal Output (Power Antenna), and the solid state Radio Receiver Circuits to ground. Two wires connect each speaker to the Radio Receiver.

Voltage is available at all times through the ARC Fuse to power the digital clock and memory related functions. This allows the clock and memory functions of the Radio Receiver to continue operation with the system OFF.