Operation CHARM: Car repair manuals for everyone.

Removal






Failure to support case properly will result in permanent distortion of case during bearing removal.

1. Remove front countershaft bearing race if it is worn or damaged. Remove countershaft front bearing race and 0-ring from transmission case using bearing race receiver and case support J 37358-1, -2 with a press.

2. Remove countershaft front bearing from countershaft using bearing and gear puller tool No. J 22912-01 or equivalent, with countershaft bearing remover tool No. J 37359, drive handle tool No. J 8092, or equivalents, and a press.