Troubleshooting Hints - Gauges and Warning Indicators

TROUBLESHOOTING HINTS

Try the following checks before doing the System Check.

1. If none of the gages operate, check GAGES fuse and PNK/BLK (39) wire for an open.

2. Check indicator bulbs.

3. If none of the Cluster Illumination Lights work, check the INST LPS Fuse.

4. If more than one indicator or gage is out, check wire(s) common to all affected circuits and inspect the Instrument Cluster Printed Circuit for cracks or flaws.

5. Check that grounds G200, and G3O4 are clean and tight.

^ Go to System Checks for a guide to normal operation.