Hazard Lights

Voltage is applied at all times through the Tail Fuse and the Hazard Flasher to the normally open contact of the Hazard Switch in the Turn/Hazard Switch Assembly. With the Hazard Switch in HAZARD, voltage is applied to both Front and Rear Turn Lights. All of the Turn Lights and both Turn Indicators flash on and off. The Front Side Marker Lights flash in HAZARD just as they did in TURN RIGHT and TURN LEFT. If the Light Switch is in OFF, they flash on when the Hazard Lights are on. If the Light Switch is in either PARK or HEAD, they flash on when the Hazard Lights are off, and off when the Hazard Lights are on. In HAZARD, the turn circuit is always open, and the Hazard Flasher controls the lights.