Stop Lights

Voltage is applied at all times from STOP Fuse to the Brake Switch. When the brake pedal is depressed, voltage is applied from the Brake Switch and Turn/Hazard Switch to CKT 18 and CKT 19, turning "ON" the LH and RH Tail/Stop/Turn Lights.
Voltage is supplied at all times through the STOP Fuse to the Brake Switch. When the brake pedal is depressed, voltage is applied from the Brake Switch to CKT 20 and the High Level Stop Light, turning "ON" the High Level Stop Light. The High Level Stop Light is not affected by the Turn/Hazard Switch Assembly.