Replace TCC Solenoid and Switches

Transmission Wiring Diagram - With 2nd Gear Switch:

Transmission Wiring Diagram - Without 2nd Gear Switch:

Transmission Wiring and Component Locations



NOTE: Not all switches are used in all transmissions. Refer to transmission name plate for specific model transmission identification reference. See transmission wiring diagrams for model identification.


REMOVE OR DISCONNECT
- Valve body cover.
- Wiring harness from case electrical connector and leads from 3rd clutch pressure switch (governor pressure switch, if applicable).
- Torque converter clutch bolt to auxiliary valve body.
- 3rd clutch pressure switch.
- Second clutch switch, if applicable.


INSTALL OR CONNECT
- Second clutch switch, if applicable.
- 3rd clutch pressure switch.
- Torque converter clutch bolt to auxiliary valve body. Install new O-ring.
- Wire harness to case and switches.
- Valve body cover with a new gasket.

ADJUST
- Fluid level.
- T.V. cable.