Exterior Trim - Marks On Surface of Body Side Moldings

Bulletin Number:
92-10-72
Reference Number:
231058
Publish Date:
1/93



Subject:
MARKS ON SURFACE OF BODY SIDE MOLDINGS (HEAT SURFACE UNTIL MARKS DISAPPEAR)

Models
Affected:
1992 SUNBIRD MODELS


Some Pontiac dealer personnel have expressed concern regarding the appearance of marks on the surface of replacement Pontiac RPO B88 body side moldings.

These marks are created by a chemical reaction that occurs when the plastic shipping sleeve contacts the molding's surface.

To remove the marks, simply heat the surface of the molding with a heat gun to approximately 29 degrees Centigrade (85 degrees Fahrenheit) until marks disappear.


Warranty Information

Use applicable labor operation time.