Seat Cover - Exhibits Wear and Tear from Seat Bolster
File In Section: 10 - BodyBulletin No.: 43-16-10
Date: November, 1994
Subject:
Seat Cover Wear/Tear from Seat Bolster (Replace Seat Back Foam, Seat Cover and Seat Bolsters)
Models:
1992-94 Pontiac Bonneville SSE, SSEi with the AL7 (F3) Seat Style
Condition
Some owners may comment on a condition where
the seat bolster may wear or tear the seat cover.
Correction
To repair this condition, replace seat back foam, seat
cover and seat bolsters. Replace the existing seat
bolsters with the following part numbers:
Right Bolster - P/N 16707696
Left Bolster - P/N 16707697
Repair Procedure
1. Remove head restraint using tool J 38530.
2. Remove seat back cover, (3) J-section retainers, (4) hog rings, (6) hook and loop patches.
3. Remove seat back foam and discard.
4. Remove bolster bladders.
5. Remove bolsters.
6. Reverse steps for installation.
Note:
Service procedure is also in Section 10-4 of the Service Manual.
Parts Information
Parts are currently available from GMSPO.
Warranty Information
For vehicles repaired under warranty, use:
Labor Operation Labor Time
07050 (Right seat) 0.8 hrs
07051 (Left seat) 0.8 hrs