Blower Motor: Service and Repair

Blower Motor And Fan:

REMOVE OR DISCONNECT

1. Nuts and cross brace bar.

2. Electrical connector from blower motor.

3. Cooling tube from blower motor.

4. Screws attaching blower motor to heater and A/C module assembly.

5. Blower motor and fan from vehicle.

INSTALL OR CONNECT

1. Blower motor to heater and A/C module assembly attaching screws, after positioning blower motor.

^ Tighten screws to 0.6 Nm (5 lb. in.).

2. Cooling tube to blower motor.

3. Electrical connector to blower motor.

4. Cross brace bar and nuts.

^ Tighten screws to 25 Nm (18 lb. ft.).