Control Assembly Replace
Heater and A/C Control Assembly:
Vacuum Harness Connector:
REMOVE OR DISCONNECT
1. Instrument Panel (I/P) trim plate.
2. Heater and A/C control assembly screws. Pull assembly rearward.
3. Connectors.
4. Heater and A/C control assembly.
INSTALL OR CONNECT
1. Connectors to heater and A/C control assembly.
2. Heater and A/C control assembly to I/P.
3. Heater and A/C control assembly screws.
^ Tighten Screws to 1.9 Nm (17 lb. in.).
4. I/P trim plate.