With Driver Only SIR

Programmer Assembly & Temperature Valve Link:

Remove or Disconnect

1. Right sound insulator.
2. IP compartment.
3. Temperature valve link rod from air mix actuator.
4. Electrical and vacuum connectors.
5. Programmer screws and programmer.

Adjust
^ Temperature valve link rod after installation, refer to "Temperature Valve Link Adjustment".

Install or Connect

1. Programmer and mounting screws.

Tighten
^ Screws to 1.4 N.m (12 lb. in.).

2. Electrical and vacuum connectors.
3. Temperature valve link to air mix valve actuator.
4. IP compartment.
5. Right sound insulator.