Breakaway Rear View Mirror - Revisied R&R Procedure

Bulletin Number: 93-8-5
Reference Number: 208120
Publish Date: 12/92

Subject:
SERVICE MANUAL UPDATE-SECTION 8A - REAR VIEW MIRROR OPTION DD7 AND DD8-REMOVE/INSTALL PROCEDURE

Models Affected:
1992-93 PONTIAC SSE AND SSEi MODELS (BONNEVILLE)

The Remove And Install Procedure for the Clip Mounted Rear view mirror has been added to supplement the Service and Electrical Systems Manuals with the addition of options DD7 and DD8 (Breakaway Rear View Mirrors).

Please update your respective Service Manual accordingly.

Remove or DIsconnect

NOTICE:
Do not use tools or other objects to pry mirror mount or mirror away from windshield. Use of tools may damage mirror mount, mirror or windshield.
1. Adjust mirror to fufl down position.
2. With both hands, grasp both sides of mirror at top.
3. Remove mirror assembly from button by rotating mirror in a downward-forward motion.

Install or Connect

1. Center bottom of mirror mount against windshield at top of button.
2. Slide mount onto button keeping mount parallel to windshield.
3. As mount starts to grip button, apply a force against button while maintaining downward force until the mount snaps onto the button with an audible click; this operation will require at least 20 pounds of force.
4. Check to make sure mirror is securely attached to button by adjusting mirror in a normal up/down and side to side range.