Oldsmobile Ninety Eight
Oldsmobile Ninety Eight1. Remove left and right lower I/P insulators.
2. Locate and remove from retainer the rear defogger timer relay.
3. Cut ORN/BLK at relay connector 4 inches from end of connector.
4. Tape wire from harness back into harness.
5. Splice 5.0 gage wire to ORN/BLK wire at timer relay.
6. At left side of I/P fuse block, strip circuit 60 ORN/BLK wire and solder 5.0 gage wire to ORN/BLK wire.
7. Push terminals into circuit breaker holder, P/N 12110057.
8. Install 30 amp circuit breaker, P/N 12077843, in circuit breaker holder.
9. Tape circuit breaker holder to the I/P fuse block and circuit 60 wires to bundle behind I/P fuse block.
10. Label circuit breaker, "Rear Defogger".
11. Attach end of RED 5.0 gage wire and the 2 ORN/BLK 60 to wire terminal ends, P/N 12065916.
12. Test rear defogger operation.
13. Reinstall left and right lower I/P insulators.