Inside Handle Bezel

Front Side Door Inside Handle Bezel (Right Shown, Left Similar)-(Pontiac):

REMOVE OR DISCONNECT
1. Accessory switch panel assembly or accessory switch opening cover assembly.
2. Front side door locking rod knob.
3. Bolt/screw (97).
4. Bezel (91).
^ Slide bezel (91) forward to release from trim assembly.
5. Switch illumination lamp socket by turning socket and removing from bezel (91).

INSTALL OR CONNECT
1. Switch illumination lamp socket.
2. Bezel (91).
^ Route inside handle assembly (35) and locking rod through appropriate openings in bezel (91).
^ Position bezel (91) and slide rearward.
3. Tighten bolt/screw (97) to 1.4 Nm (12 lb. in.).
4. Front side door locking rod knob.
5. Accessory switch panel assembly or accessory switch opening cover assembly.