Removal/Installation

OIL PUMP ASSEMBLY





Remove or Disconnect
1. Oil pan assembly.
- Oil Pan

2. Bolt/screw (16) attaching oil pump assembly (17) to rear crankshaft bearing cap.
3. Oil pump assembly (17) and driveshaft (18).



Install or Connect
1. Oil pump assembly (17) and driveshaft (18).
^ Align slot on end of intermediate shaft (18) with drive tang on oil pump drive assembly.

2. Bolt/screw (16) attaching oil pump assembly (17) to rear crankshaft bearing cap.
- Tighten Bolt/screw (16) to 41 N.m (30 lb. ft.).

3. Oil pan assembly.