Cylinder Heads

CYLINDER HEAD





Tool Required: J 36660 Torque Angle Meter Right


RIGHT SIDE

Install or Connect
1. Cylinder head gasket (112).
2. Cylinder head (113).
3. Cylinder head bolts (115). [Figure 68]
- Tighten Bolts (115) in sequence to 55 N.m (41 lb. ft.). Figure 68.
- Turn bolts (115) in sequence an additional 90° using J 36660.

4. Pencil brace bracket bolts.


LEFT SIDE

Install or Connect
1. Cylinder head gasket (112).
2. Cylinder head (113).
3. Cylinder head bolts (115). [Figure 68]
- Tighten Bolts (115) in sequence to 55 N.m (41 lb. ft.)
- Turn bolts (115) in sequence an additional 90° using J 36660.

4. Engine coolant temperature sensor (114).
Apply teflon sealant GM p/n 1052080 to threads of sensor (114).
- Tighten coolant ternperature sensor (114) to 13 Nm (115 lb. in.).

5. Engine lift bracket (200) and bolts (201).
- Tighten Bolts (201) to 50 N.m (37 lb. ft.).

6. Oil level indicator tube nut (47).
- Tighten Nut (47) to 21 N.m (15 lb. ft.).

7. Power steering pump bracket (38), nut (39) and bolt (37).
- Tighten Bolt (37) to 25 N.m (18 lb. ft.).
- Tighten Nut (39) to 50 N.m (37 lb. ft.).