Exhaust Manifold

EXHAUST MANIFOLD









Transfer Parts
If replacing an exhaust manifold, transfer the following:
1. Oxygen sensor (111 and 217).
- Tighten Oxygen sensor (110 and 218) to 42 Nm (31 lb. ft.).

2. Right manifold EGR adapter pipe (209) and studs (210).
- Tighten Studs (210) to 31 N.m (23 lb. ft.).

3. Right manifold EGR gasket (208), EGR (206) and bolts (207).
- Tighten Bolts (207) to 30 N.m (22 lb. ft.).

4. Right manifold EGR flexible adapter pipe gasket (211 ), EGR flexible adapter pipe (212) and bolts (214).
- Tighten Bolts (214) to 26 N.m (19 lb. ft.).



Install or Connect
1. Exhaust manifold gasket (106 and 216).
2. Exhaust manifold (105 and 215) and heat shields (103, 104 and 205).
3. Exhaust manifold retaining bolts (102 and 202).
- Tighten Bolts (102 and 202) to 25 Nm (18 lb. ft.).

4. Secondary air injection pipe assembly, if equipped.
5. AIR pipe fitting to right exhaust manifold, if equipped.
6. AIR pipe retaining nut (184) and bolt (183), if equipped.
7. A/C compressor and generator mounting bracket.
8. A/C compressor and generator mounting bracket bolts.
9. Generator pencil brace bolts and braces.
10. Rear A/C compressor bracket mounting bolts and bracket.
11. Serpentine drive belt.